Click image to enlarge

• Save 15% on individual product prices. R.R.P. £162.08, YOU SAVE £24.31
• Enough to install a run of wire up to 180m
• Ideal for protecting metal, plastic or glass sufaces from seagulls
• Surface Mount Bases available in grey, white, stone and black
• All components made in corosion resistant stainless steel, copper and nylon

Specification

Kit Includes:

• 2 X 100m of Seagull Wire (PW250)
• 60 X 150mm Single Headed Seagull Posts (PW231)
• 60 X Micro Springs (PW227)
• 200 X Copper Crimps (PW228)
• 60 X Surface Mount Bases (PW222)
• 1 x Crimp Tool (PW241)
• 1 X Surface Activator 1000ml (BS365)
• 1X Silicone Adhesive 310ml (BS365)

All Post & Wire Components are supplied in corrosion resistant stainless steel, copper or nylon

Usage

This kit is intended for use on non-masonry substrates that can not take anchor rivets, including metal, plastic and glass. If you require post & wire to be used on masonry substrates then you should consider using our post and wire masonry kit or our range of specialit brackets for gutters, steel beams, pipes or rails.

This surface mount kit for seagull post and wire provides suffidcient materials for a 180m run of 150mm single-head posts. Parallel rows should be set no more than 100mm apart (max 100mm behind first row).

Once the posts are seated in their surface mount bases the heads of the posts will be at 150mm.

Maximum distance between seagull wire posts = 3000mm (3m)

Seagull wire should be spring-tensioned every 3000mm (3m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.

In doing so you are spreading the load evenly across the post system and thus avoiding spring overload

DO NOT thread the pigeon wire through the eyelets of the post and onwards to the next post, as this will cause the system to sag and go out of shape.

The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid the system from sagging DO NOT use springs in the counter-tension wires.

Instructions and Technical Guide

Post and Wire Product Specification