- Save 15% on individual product prices. R.R.P. £117.79, YOU SAVE £17.67
- Enough to install a double run of wire up to 30m
- Ideal for proofing metal, plastic or glass sufaces from pest pigeons
- Surface Mount Bases available in grey, white, stone or black
- All metal components made in Stainless Steel
Specification
Kit Includes:
- 100m of Pigeon Wire
- 30 125mm Single Headed Pigeon Posts
- 30 90mm Single Headed Pigeon Posts
- 60 Stainless Steel Springs
- 200 Nickel Crimps
- 60 Surface Mount Bases
- Crimp Tool
- Surface Activator 1000ml
- Silicone Adhesive 310ml
All post & wire components are supplied in stainless steel
UsageThis kit is intended for use on non-masonry substrates that can not take anchor rivets including metal, plastic and glass. If you require post & wire to be used on masonry substrates then you should consider using our post and wire masonry kit or our range of specialit brackets for gutters, steel beams, pipes or rails.
This surface mount kit for pigeon post and wire provides suffidcient materials for a 30m run of front 90mm single-head posts followed by a second row (max 65mm behind first row) of single-head 125mm posts.
Once the posts are seated in their surface mount bases the heads of the posts will be at 90mm and 125mm.
Maximum distance between pigeon wire posts = 1500mm (1.5m)
Pigeon wire should be spring tensioned every 1500mm (1.5m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.
In doing so you are spreading the load evenly across the post system and thus avoiding spring overload
DO NOT thread the pigeon wire through the eyelets of the post and onwards to the next post, as this will cause the system to sag and go out of shape.
The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid the system from sagging DO NOT use springs in the counter-tension wires. | 
.jpg)
.jpg)
