| 180m Seagull Post and Wire Kit For Surface Mounting |  |
- Save 15% on individual product prices. R.R.P. £162.08, YOU SAVE £24.31
- Enough to install a run of wire up to 180m
- Ideal for protecting metal, plastic or glass sufaces from seagulls
- Surface Mount Bases available in grey, white, stone and black
- All components made in corosion resistant stainless steel, copper and nylon
| | |
| |
|
| Surface Mount Base | .jpg) |
- Nylon base for use in mounting 4mm bird wire posts on surfaces that can not be drilled
- Can also be used to hold bird netting perimeter wire ropes to surfaces that can not be drilled
- Suitable for metal, plastic, glass and wood suppplied in grey, white, stone or black.
- Can be bonded using Silirub N or Fix All or screwed in place using pre-drilled holes
- For bonding use surface activator to clean the base and the surface being adhered to
| | |
| |
|
| Surface Activator 1000ml | .jpg) |
- 3-in-1 cleaner, degreaser and etch-primer. Supplied in 1000ml tins
- Activates non-porous surfaces such as plastics, synthetic coatings and metals for improved adhesion of our Soudal Silirub N silicone spike adhesive and Fix All adhesive
- Apply with clean paper towel or tissue. Drying time 5 minutes.
- Once opened use withinn 3-months. Always read the label before use.
| | |
| |
|
| Gull Wire Reel |  |
- Grade 304 stainless steel 1x7 construction seagull wire
- 0.96mm in diameter
- For use with our 1mm copper crimps (PW228) and micro springs(PW227)
- N.B. Nickle Crimps will not fit this product.
| | |
| |
|
| 1.0mm Gull Wire Copper Crimps 100 Pack |  |
- Copper crimps for securing 0.96mm Seagull Wire to Gull Posts and Gull Wire Micro Springs
- 1 CU DIN for use with 0.96mm wire
- Sold in packs of 100
- Use either with our bird wire crimp tool or our ratchet crimp tool.
| | |
| |
|
| Bird Wire Crimp Tool | .jpg) |
- Pliers with specially shaped jaws
- Specifically designed for crimping pigeon and gull wire
- Also features a cutter tool
| | |
| |
|
| Screw Pin and Plug Masonry Anchor Fixing 10 Pack |  |
- Use to counter tension each end of a run of bird wire
- can also be used as a low profile netting intermediate fixing for masonry
- Manufactured in stainless steel
- Use with a 6mm masonry drill bit
- Red Wall Plugs included
| | |
| |
|
|
.jpg)
